IND. DFM 2GB STANDARD TEMP. IDE 40-PIN VERTICAL

Compatibility     True IDE

Flash Technology NAND Type SLC Flash Memory based

Flash Capacity 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB and 16GB

Form factor                            40-pin / 44-pin Vertical Type with housing

                                                     Horizontal Type in Rightwards

                                                         Horizontal Type in Leftwards

Connector                                Standard 40-pin 2.45mm female IDE connector

                                                 Standard 44-pin 2.20mm female IDE connector

System Performance

Data Transfer Mode          PIO Mode 4 / UDMA Mode 4

Sequential Read        Standard     30Mbytes / sec Max.

                                     High            43Mbytes / sec Max.

Sequential Write

Standard         20Mbytes / sec Max.

High               37Mbytes / sec Max.

Average Access Time     2ms

Environmental Specification

Standard Temperature          Operating        0℃~70℃

                                          Non-operating       -20℃~80℃

Wide Temperature

                                         Operating                           -40℃~85℃

                                      Non-operating                  -50℃~95℃

Humidity                   5~95% non-condensing

Vibration                 20 G peak to peak

Shock                   1500 G

Reliability

MTBF (Mean Time Between Failure)     > 2,000,000 hours

Error Code Correction    4 bits ECC Code Endurance Greater than 1,000,000 cycles logically contributed by wear-leveling and advanced bad sector management algorithms.

Power Consumption

Power Requirements     +5V ± 10% ; +3.3V ± 5%

Read 57.7 mA (typ.)

Write 60 mA (typ.)

Sleep Mode 2.3 mA (typ.)