INDUSTRIAL SSD 32GB 2.5" IDE SLC FLASH STANDARD TEMP

In stock
SKU
INDUSTRIAL SSD 32GB 2.5" IDE SLC FLASH STANDARD TEMP
$282.00

Fully compatible with devices and operating systems that support the E-IDE / ATAPI-4 standard. Supports Ultra DMA Mode 4. High reliability based on internal ECC function. Reliable wear-leveling algorithm for maximum flash endurance. Suitable for rugged environments.

Fully compatible with devices and operating systems that support the E-IDE / ATAPI-4 standard. Supports Ultra DMA Mode 4. High reliability based on internal ECC function. Reliable wear-leveling algorithm for maximum flash endurance. Suitable for rugged environments.

Specifications:-

  • Compatibility ATAPI-5 Standard Flash Technology 
  • NAND Type Flash Memory Base 
  • Flash Capacity 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB, 16GB, 32GB, 64GB, 128GB and 256GB 
  • Form factor 2.5inch or 1.8inch 
  • Connector Standard 44pin male 
  • IDE connector Master/Slave Setup By Jumper 
  • System Performance Data Transfer Mode PIO Mode 4 / UDMA Mode 4 
  • Sequential Read Standard 29Mbytes / sec Max. 
  • High 43Mbytes / sec Max. 
  • Sequential Write Standard 19Mbytes / sec Max. High 37Mbytes / sec Max. Average Access Time 1ms

 Environmental Specification

  • Standard Temperature Operating 0℃~70℃ 
  • Non-operating -20℃~80℃ 
  • Wide Temperature Operating -40℃~85℃ 
  • Non-operating -50℃~95℃ 
  • Humidity 5~95% non-condensing 
  • Vibration 20G peak to peak 
  • Shock 1500 G 
  • Reliability MTBF (Mean Time Between Failure) > 2,000,000 hours 
  • Error Code Correction 4 bits 
  • ECC Code Endurance Greater than 1,000,000 cycles logically contributed by wear-leveling and advanced bad sector management algorithms. 
  • Power Consumption Power Requirements +5V ± 10% 
  • Read 85 mA (typ.) 
  • Write 90 mA (typ.) 
  • Standby Mode 2 mA (typ.)