INDUSTRIAL SSD 64GB 2.5" SATA-II SLC FLASH STANDARD TEMP

In stock
SKU
INDUSTRIAL SSD 64GB 2.5" SATA-II SLC FLASH STANDARD TEMP
$738.00

Fully compatible with devices and operating systems that support the E-IDE / ATAPI-4 standard. Supports Ultra DMA Mode 4. High reliability based on internal ECC function. Reliable wear-leveling algorithm for maximum flash endurance. Suitable for rugged environments.

Fully compatible with devices and operating systems that support the E-IDE / ATAPI-4 standard. Supports Ultra DMA Mode 4. High reliability based on internal ECC function. Reliable wear-leveling algorithm for maximum flash endurance. Suitable for rugged environments.

Compatibility   Serial ATA 2.0 Specification
Flash Technology NAND Type Flash Memory Base
Flash Capacity 4GB, 8GB,16GB, 32GB, 64GB, 128GB
Form factor Horizontal Type in Rightwards
Connector  

Standard 7+15pin Female Serial ATA connector
Standard Mini 5-pin female USB connector

System Performance
Data Transfer Mode   Read/ Write Serial ATA Mini USB
SLC Type Flash Sequential Read 170Mbytes / sec Max. 30Mbytes / sec Max.
Sequential Write 140Mbytes / sec Max. 25Mbytes / sec Max.
Average Access Time 0.5ms
Environmental Specification
Standard Temperature  
Operating 0ºC ~ +70ºC
Non-operating -20ºC ~ +80ºC
Wide Temperature
Operating -40ºC ~ +85ºC
Non-operating -50ºC ~ +95ºC
Humidity 5~95% non-condensing
Vibration 20 G peak to peak
Shock 1500 G
Reliability
MTBF (Mean Time Between Failure)   > 2,000,000 hours
Error Code Correction BCH8 can correct up to 8 random error bits within 512 data bytes.
Endurance(SLC)

Greater than 1,000,000 cycles logically contributed by
Wear-leveling and advanced bad sector management algorithms

Endurance(MLC)  

Greater than 100,000 cycles logically contributed by 
Wear-leveling and advanced bad sector management algorithms

Power Consumption
Power Requirements   +5V ± 10%
Read 550 mA (typ.)
Write 500 mA (typ.)
Sleep Mode 210 mA (typ.)